How to operate and maintain
Operating Procedures
1 First hair removal process
1）Consulting:Can call or enter the store for one-on-one free consultation, talk about the hair troubles,The beautician will customize personalized treatment to your situation and eliminate uneasiness and doubts by explaining hair removal.
2）Confirm the skin:The beautician confirm your skin condition, hair texture and hair volume and determine the treatment plan.
3）Apply gel: Clean both axils and apply a gel containing hair suppression components.
4）Irradiation: the customer wears goggles and gives painless irradiation to complete the hair removal course for 3 minutes.
5）Cooling: wipe the gel and apply the skin with a cooling package.
6）Sdation (Apply beauty fluid) Apply a beauty solution with a sedative and moisturizing effect, and gently care for the skin after hair removal.
2 Related parameter setting suggestions
All the above parameters are for reference only, and the operator shall adjust the parameters according to different customers. Note: In order to get better results, you can adjust the parameters according to the customer feeling, the customer must feel the heat, or even a little tingling, which will be the appropriate parameter, after the treatment, the treated area may be a little red and will be in normal condition.
3 Therapy process
1）Make sure the patient lies comfortably on the operating table and wears glasses, also required for all people in the treatment room. The operator can have very convenient access to the treatment area, as well as the instruments
2）Remove perfumes, makeup residues, and sunscreen on the skin;
3）Check the handle and determine that the handle cooling effect is good;
4）Apply the gel to the treatment area; Move the handle perpendicular to and in contact with the skin, and stroke gently on the skin
4 Precautions
1）The morphology of skin color and hair follicles (erythema or edema) in the treatment area should be viewed from time to time during the treatment. Even if the set parameters are appropriate, you will also smell the smell of hair burning;
2）If the side effects occur before the hair follicle responds well, the treatment parameters should be adjusted in time to reduce the injury of the treatment;
3）If the skin has no adverse reactions or any morphological changes, increase the energy by 5-10% until the desired effect is achieved;
5 Turn off the power
The operating system shall be completed and the instrument powered off.
Maintenance and troubleshooting
Cleaning the unit
Clean the outside of the system at least once a week. Wipe the surface of the instrument with a soft non-friction cloth. Please replace the water (pure or distilled water) at least every three months.
Cleaning the crystal
The crystal on the handle shall be kept clean after treatment; dry velvet or anhydrous alcohol cloth shall be used when cleaning the crystal.
Troubleshooting solution
The following table lists some possible failures and the orresponding solutions
